WINTRAY Generation 1 & WINTRAY Generation 2 - Better Impressions

WINTRAY Generation 1 & WINTRAY Generation 2 - Better Impressions

 


 



The WINTRAY® Impression Tray
was developed in cooperation with Dr. Guillaume and Dr. Mazeirat to enable taking an accurate impression of dental implants.

In implant prosthetics the prosthetic result depends directly on the reliability of the pick-up impression, which is required for fabricating the laboratory working model. Stock trays or custom trays made from resin materials do not meet the biomechanical requirements of implant restorations. In order to take pick-up impressions of dental implants for the dental laboratory, dentists must currently use a stock tray and drill some holes through it, therefore destroying the tray, or get a perforated custom tray fabricated in a dental laboratory at considerable costs.

The WINTRAY® Impression Tray was developed in a way that several segments can be removed at the position of the implant.

It is much easier and faster with the latest generation of WINTRAY®, as the segments are only retained using a simple retentive clip instead of a screw compared to our previous well-established model.

The low tray walls also allow closer proximity to the alveolar ridge to produce greater emergence of the impression posts, which is then more clearly visible intraorally. In addition, the shorter tray walls do not press as strongly on the mucosa and are therefore less painful for patients with edendulous jaws. Due to the fact that the windows are larger now the new WINTRAY® can be used of pick-up impressions with divergent axes, which is very useful in the case of superstructures on several abutments.

The WINTRAY® is an impression tray with removable segments – it is rigid, re-usable, can be sterilized and only a single appointment ist required for casting a perfect working model.
 

WINTRAY® Impression Tray

  • 9 removable segments
  • especially suitable for the Pick-up impression technique
  • delivered including 4 screws and 1 key
  • perforated for retention of impression material
  • constructed from Stainless Steel
  • re-usable – can be sterilized up to  200°C (398°F)
  • extremely rigid for high precision impressions
  • available for upper- and lower jaw,    each in 3 sizes (S, M, L)
 

WINTRAY® NEW GENERATION

  • 4 segments
  • Easily removed by a simple click-system, neither screws nor screwdriver anymore !
  • Due to its reduced height particularly suited for the impression in edentulous jaw. Thus the
  • treatment is more pleasant for the patient!
  • constructed from Stainless Steel
  • re-usable – can be sterilized up to  200°C (398°F)
  • extremely rigid for high precision impressions
  • available for upper- and lower jaw,    each in 3 sizes (S, M, L)

Download catalog WINTRAY here:
 

Suport clienti 09:00 - 18:00

0751794106 office@invictusmedical.ro
#487016

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!